Industrial Water Treatment Engineering & Services
Turnkey plant manufacturing, technical commissioning, and annual maintenance for industrial facilities across Baddi, Nalagarh, Solan, Kala Amb, and Jammu.
12+ Years
Industrial Experience
450+ Plants
Installed Across North India
2-Hour
Baddi Emergency Response
100%
PCB Compliance Guarantee
Engineered for Industrial Reliability & Peak Uptime
From pharma-grade purified water generation to zero-liquid-discharge (ZLD) effluent remediation.
Industrial RO Plants
Engineered for high-TDS feed water across pharmaceutical, food, textile, and chemical units. Achieves up to 99.2% salt rejection and zero-leakage SS316 piping.
Demineralization (DM) Plants
Produces high-purity deionized water with conductivity < 0.5 µS/cm. Essential for high-pressure industrial boiler feed, electronics, and battery manufacturing.
Effluent Treatment Plants (ETP)
Complete industrial wastewater remediation systems engineered to drop BOD, COD, heavy metals, and oil & grease below State Pollution Control Board compliance norms.
Sewage Treatment Plants (STP)
Modern compact sewage treatment systems for residential townships, corporate campuses, industrial facilities, and hospitals. Odor-free treated water recycled for gardening and flushing.
Industrial Water Softeners
Eliminates total hardness (calcium and magnesium) to protect boiler heat-exchanger tubes, cooling circuits, and laundry equipment from catastrophic mineral scaling.
Cooling Tower Water Management
Comprehensive cooling water chemistry management, side-stream sand filtration, descaling, and algaecide/biocide shock treatment to optimize Delta-T and thermal efficiency.
Ultrafiltration (UF) Plants
High-flux hollow fiber membrane technology to eliminate suspended solids, colloidal silica, and turbidity. Ideal pretreatment for RO plants and surface water purification.
Turnkey AMC & Maintenance
Preventive maintenance, routine membrane CIP cleanings, resin regeneration, multiport valve overhaul, and water lab testing across Baddi, Nalagarh, Solan, and Jammu.
Which Water Treatment System Does Your Plant Need?
Match your incoming raw water quality and factory compliance requirements to the ideal engineering technology.
| System Technology | Target Contaminants | Treated Water Quality | Recommended Applications | Maintenance Cycles |
|---|---|---|---|---|
| Industrial RO | Total Dissolved Solids (TDS), Heavy Metals | TDS < 20 ppm, 98%+ Recovery | Pharma, Food & Beverage, Boiler Feed Pretreatment | Membrane Cleaning every 3–6 months |
| DM Plant | Dissolved Mineral Ions, Silica | Conductivity < 0.5 µS/cm, Silica < 0.02 ppm | High-Pressure Steam Boilers, Power Plants, Laboratories | Chemical Acid/Alkali Regeneration cycles |
| Water Softener | Calcium & Magnesium Hardness | Hardness < 5 ppm (Zero Hardness) | Cooling Towers, Low-Pressure Boilers, Commercial Laundries | Salt (NaCl) Brine Recharging |
| Ultrafiltration (UF) | Turbidity, Suspended Solids, Bacteria, Silt | SDI < 2.5, Turbidity < 0.1 NTU | RO Pretreatment, Surface Water Clarification, ETP Tertiary | Daily automated air scouring & CEB |
| ETP & STP | BOD, COD, Oil & Grease, TSS, Coliform | BOD < 10, COD < 50, PCB Norms | Industrial Effluent Recycling & Commercial Sewage Reuse | Sludge Dewatering & Aeration Blower Checks |
Our 5-Stage Turnkey Execution Process
From initial raw water testing to final State Pollution Control Board clearance.
Water Lab Audit
Complete testing of raw water for TDS, Hardness, Silica, pH, Heavy Metals & Biological load.
Custom Sizing
Membrane projection modeling & equipment layout design customized to your factory runtime.
Fabrication
Precision skids, pressure vessels, and automation panels fabricated at our Davni, Baddi works.
Commissioning
On-site piping, hydro-testing, electrical interlocks, and full plant commissioning with flow calibration.
AMC & Spares
Round-the-clock local service desk, consumable chemical supply, and certified operator training.
Need a Detailed Technical Sizing & Price Quotation?
Share your daily water requirement and plant location. Our senior water engineering team in Baddi will prepare a detailed engineering proposal with P&ID and quotation within 2 business hours.